Are you looking for high quality C-band earth station antenna? Newstar offers a wide range of S-band fixed earth stations ranging from 3.5m to 18m and configured in receive-transmit or receive-only mode. These antennas offer excellent electrical performance and outstanding versatility as low frequency S-band tracking telemetry and control (TT&C) signal receive and transmit antennas for all full motion tracking applications including LEO and MEO.
You can find suitable styles and sizes in Newstar's Earth Station catalog. This article introduces you to the C-band earth station antenna you should buy in 2025.
C-band Earth Station Antenna
Newstar's C-band earth station satellite antenna meets FCC and ITU-RS-580 requirements.The earth station features a reflector design with precision-formed panels, contoured radiating lines, and machined hub assemblies. It features an innovative feed and sub-reflector design for high gain, low noise temperature, high antenna efficiency, and excellent noise and microwave interference rejection.
The large center wheel provides ample space for equipment installation. The reflector is supported by a galvanized main column base that provides the required stiffness for pointing and tracking accuracy. The base is designed for full track arc coverage and easily adapts to ground or roof installations.
Specifications of Newstar 13m Satellite Antenna
Newstar's C-band earth station antennas provide excellent performance for transmit/receive and receive-only applications.
1. Feature
- Meets or exceeds CCIR 580 and INTELSAT requirements;
- Cassegrain antenna;
- High gain, Low sidelobe, high G/T rate;
- Hot-dip zinc processed Antenna mount, with strong corrosion resistant ability;
- Optional C band with 870 MHZ bandwidth;
- 2-ports or 4 ports Linear/Circular feed optional;
2. Standard configuration
Main reflector, subreflector, subreflector support, back support frame, kingpost, feed, antenna AZ/EL drive system, foundation drawing, foundation template and standard component.
3. Optional
Deicing equipment, ODU support, motorized polarization;
4. Parameter
| Model | NS-SEC-1300 | ||
| C-band | |||
| RX | TX | ||
| Frequency, GHz | 3.625~4.2 | 5.85~6.425 | |
| Gain,Mid-band, dBi | 52.39 | 56.3 | |
| @3.95Ghz | @6.2Ghz | ||
| Pol | Linear / circular | ||
| Axis ratio | 2-Port Feed | 0.9 | 0.9 |
| VSWR | 1.25:1 | 1.25:1 | |
| Noise temperature | 10°elevation | 46°K | / |
| 30°elevation | 26°K | ||
| 50°elevation | 23°K | ||
| -3dB Beamwidth, Mid-band | 0.41° | 0.26° | |
| Feed loss, dB | 0.3 | 0.4 | |
| G/T value,El>10° | 33.18dB/K | / | |
| (30°LNA) | |||
| Isolation,Rx to Tx,dB | 85 | ||
| Interface | CPR-229G | CPR-137G | |
| First side lobe | ≤ -14 | ||
| Side lobe envelop | 29-25 log(θ) dBi 1°≤θ≤20° | ||
5. Mechanical specifications
| Size | 13 m | ||||
| Type | Cassegrain | ||||
| Kingpost | El over Az | ||||
| Driver model | Motorized | ||||
| Panel qty | 32pcs inner+32pcs outer | ||||
| Panel material | Aluminum | ||||
| RMS | ≤0.5mm | ||||
| Turn range | Az | 5°~90° | |||
| El | ±65° | ||||
| Pol | ±90° | ||||
6. Environment specifications
| Wind speed of work | 72kmph work wind speed(Hold the precision ) |
| 97kmph work wind speed(Lower the precision ) | |
| 200kmph Survival Winds(Upturned lock) | |
| Ice Load, Survival | 13mm Wrapped ice normal work |
| 25mm Wrapped ice survival | |
| Temperature | -30ºC~50ºC |
| Relative Humidity | 100% |
| Surface treatment | Steel parts: Hot-dipped zinc |
| Aluminum parts:spray paint | |
| Solar Radiation | 1135Kcal/h/m² |
7. Applications:
- Telecommunication departments
- Gate station
- Seismological Bureau , roads and traffic authority,, governments, etc.
- Remote sensing
- State Weather Bureau
Your Trusted C-band Earth Station Supplier
Shaanxi Newstar Communications Equipment Co., Ltd. (Newstar for short) is one of the leading earth station antenna manufacturers in China. Newstar is well positioned to provide the most cost-effective solution to satellite communication needs worldwide. Provide them with 4.5m, 5.3m, 6.2m，11m, and 13m ground stations. We can provide you with various high-gain C-band earth station antennas according to your requirements.
We can well understand customer needs and provide professional satellite communication system solutions. We are willing to be your reliable support partner.
FAQ for Buying C-band Satellite Dish
Q1. Can you give me a discount price?
A: Due to satellite communication products are not common products, so the discount is relatively speaking. It's not a big quantity that can obtain a big discount. The prior issue is to ensure the antenna's every specification and usage!
Q2. How can I get a sample?
A: For our products are industrial-type antennae, the cost is relatively high, so customers need to pay for the sample and undertake freight themselves.
Q3. How can you deal with after-sale service?
A: Industrial-type satellite antenna is different from other products. For an earth station type antennae that sizeS4. 5m, we usually provide online guidance or an antenna user manual to help customers to install antennas; the earth station type antennas that size 24.5m, we can send the engineer to go to the customer's site training and help the antenna users install & debug antenna system. We provide satellite communication integrated system training for customers.
Q4. What is the payment term?
A: Generally, we prefer TT. However, it is open for discussion.
Q5. What is the production's lead time?
A: 1) If we have stock of your requested products, we will arrange shipment after receiving the negotiated payment;
2) If the requested products need production, we will deliver the goods as per the negotiated date.
If you have more questions or doubts for us, welcome to contact us freely.
Further reading: