3.7m C/ku Band Limited Motion Earth Station Antenna
Antenna aperture: 3.7m
Reflector type: Ring focus
Surface accuracy (RMS): ≤0.5 mm
Panel QTY: 12 pcs
Panel material: Aluminum
Panel Surface treatment: Compressed by aluminum, degreased and based with yellow zinc paint and finished with antirust white paint
Steel parts surface treatment: Primer base + hot sprayed paint+ anti-rust finish paint
Azimuth travel: 0°~360°
Elevation travel: 5°~90°
Polarization travel: ±90°
Drive mode: AZ/EL/Pol motorized or manual available
Mount type: El over Az, single pole
3.7m Rx/Tx antenna characteristics:
3.7m Rx/Tx antenna standard configuration:
Main reflector, subreflector, subreflector support, back support frame, kingpost, feed, solid wretch, foundation kit and standard component.
3.7m Rx/Tx antenna optional parts:
BUC, LNB, Modem, spectrum analyzer, moving foundation, de-icing equipment, BUC fix bracket, servo control system, motorized polarization, 4-port feed, lightning protection device, installation tools, cable and connector.